• Flexible, one component, adhesive and sealing compound in a cartridge (310ml)
• High levels of Gas and Water tightness
• Excellent adhesion
• Resistant against Water, Alkaline, Chemical agents
• Resistant to Hydrocarbons
• Suitable for sealing underground cable ducts set out within the APEA ‘Blue Book’
• Resistant to Hydrogen Sulphide/Methane and many other Gases (NedLab)
• Resistant to rats
• Resistant to termites (Mastotermes Darwiniensis) Northern Australian termites
• Non corrosive
• Solvent free
• Shock absorbing
• Non toxic, neutral and almost odourless
• Complies with ATEX regulations
• WIMES Compliant, 3.02(April2013) Section 6.4.3.2-d.
• Suitable for any shaped duct/ borehole/ opening
• Seals all known materials, PVC & PE sheathed cables, PILC, (HD) PE pipes
• Suitable for renovations, can be installed retrospectively
• Up to 1 bar pressure resistance
• Quick & easy to install, especially in vertical ducts
• Non Hazardous
• Over 25 years of operational experience

• High levels of Gas and Water tightness
• Excellent adhesion, applicable to all common building materials
• Shows Fire resistance properties
• Resistant against Water, Alkaline, Chemical agents
• Resistant to Hydrogen Sulphide/ Methane and many other Gases (NedLab)
• Non corrosive
• Solvent free
• Shock absorbing
• Nontoxic, neutral and almost odourless
• Complies with ATEX regulations
• Suitable for any shaped duct/ borehole/ opening
• Quick and easy installation
• Seals all known materials, PVC & PE sheathed cables, PILC, (HD) PE pipes
• Suitable for renovations, can be installed retrospectively
• Resistant to Rats
• Resistant to termites (Mastotermes Darwiniensis) Northern Australian termites
• Resistant to hydrocarbons

• Gas & Water tight up to 2bar
• Excellent adhesion, applicable to all common building materials
• Fire resistant to BS EN1366-3:2009 & AS1530.4-2014
• High Oxygen index
• Resistant against Water, Alkaline, Chemical agents
• Resistant to Hydrogen Sulphide / Methane and many other Gases (NedLab)
• Non corrosive
• Solvent free
• Shock absorbing
• Non toxic, neutral and almost odourless
• Complies with ATEX regulations
• Suitable for any shaped duct / bore hole / opening
• Quick and easy installation
• A complete kit
• Seals all known materials, PVC & PE sheathed cables, PILC, (HD) PE pipes
• Suitable for renovations, can be installed retrospectively
• Resistant to Rats
• Resistant to termites (Mastotermes Darwiniensis) Northern Australian termites
• WIMES Compliant, 3.02(April2013) Section 6.4.3.2-b

Filoseal+HD FIRE –
75>110mm Duct Sealing System
2 bar, water, gas & rodent proof plus BS EN1366-3:2009 Fire certified – up to 110mm

Filoseal+HD FIRE –
125>160mm Duct Sealing System
2 bar, water, gas & rodent proof plus BS EN1366-3:2009 Fire certified – up to 160mm

Filoseal+HD FIRE –
180mm Duct Sealing System
2 bar, water, gas & rodent proof plus BS EN1366-3:2009 Fire certified – up to 180mm

Filoseal+HD FIRE –
200mm Duct Sealing System
2 bar, water, gas & rodent proof plus BS EN1366-3:2009 Fire certified – up to 200mm

Filoseal+HD FIRE –
225mm Duct Sealing System
2 bar, water, gas & rodent proof plus BS EN1366-3:2009 Fire certified – up to 225mm

Filoseal+HD FIRE –
250mm Duct Sealing System
2 bar, water, gas & rodent proof plus BS EN1366-3:2009 Fire certified – up to 250mm

• Gas- and watertight 1,0 bar
• Expanding polyurethane sealant with a high density and a closed watertight cell structure
• Can be used in any shaped or sized duct up to 200mm
• Easy and quick installation
• One complete kit for sealing of one duct
• Seals all known materials: PVC & PE sheeted cables, PILC cables, (HD)PE pipes, PE drink water conduits
• High mechanical strength, resists ground movement, shocks and vibrations
• Also suitable for renovation works
• No architectural measures necessary
• Used by various utility companies as well as contractors
• Over 25 years of operational experience

Filoform duct sealing systems have been developed to provide an effective gas and watertight seal of underground cable penetrations. When installing our duct sealing system MD3, you will protect valuables from damage which is caused by gas and water leaks.

Filoform duct seals type MD are based on a specially formulated two-component expanding polyurethane resin. The polyurethane sealant is packed in a transparent plastic bag with a screw ring. In this plastic bag, the two components are separated by a clamping profile. After removal of the clamping profile, the two components are simply mixed together for 30 seconds. The package is now ready for use and can be easily opened with the use of the screw nipple.

After pouring the resin in the duct, the resin starts expanding by forming CO². During the expansion the polyurethane filling material penetrates all areas inside the duct, thus sealing all openings regardless of the shape of the duct or borehole. After this the hardening process starts. The Filoform two component filler provides not only a 100% gas and watertight seal but also offers excellent mechanical strength.

The MD3 system is suitable in situations where more than one cable or pipe is in the duct. The opening of the duct does not need to be completely round.

• Gas- and watertight 1,0 bar
• After mixing the polyurethane sealant it will expand and cures/hardens with a high density and a closed cell structure
• Can be used in any shaped or sized duct up to 200mm
• Easy and quick installation
• One complete kit for sealing of one duct
• Seals all known materials: PVC & PE sheeted cables, PILC cables, (HD)PE pipes, PE drink water conduits
• High mechanical strength, resists ground movement, shocks and vibrations
• Also suitable for renovation works
• No architectural measures necessary
• Used by various utility companies as well as contractors
• Over 25 years of operational experience

Filoform duct sealing systems have been developed to provide an effective gas and watertight seal of underground cable penetrations. When installing our duct sealing system MDIV, you will protect valuables from damage which is caused by gas and water leaks.

Filoform duct seals type MD are based on a specially formulated two-component expanding polyurethane resin. The polyurethane sealant is packed in a transparent plastic bag with a screw ring. In this plastic bag, the two components are separated by a clamping profile. After removal of the clamping profile, the two components are simply mixed together for 30 seconds. The package is now ready for use and can be easily opened with the use of the screw nipple.

After pouring the resin in the duct, the resin starts expanding by forming CO². During the expansion the polyurethane filling material penetrates all areas inside the duct, thus sealing all openings regardless of the shape of the duct or borehole. After this the hardening process starts. The Filoform two component filler provides not only a 100% gas and watertight seal but also offers excellent mechanical strength.

• Gas- and watertight 1,0 bar
• Can be used in any shaped or sized duct up to 200mm
• Easy and quick installation
• One complete kit for sealing of one duct
• Seals all known materials: PVC & PE sheeted cables, PILC cables, (HD)PE pipes, PE drink water conduits
• High mechanical strength, resists ground movement, shocks and vibrations
• Also suitable for renovation works
• No architectural measures necessary
• Used by various utility companies as well as contractors
• Over 25 years of operational experience

The MD+ sealant is easily applied from a skeleton gun. The high quality, one component, flexible sealant “MD+” is based on a silicon compound that cures with air (Humidity).

After application and full curing the thixotropic MD+ forms a plastic elastomer mass with special qualities effectively sealing and bonding, while providing a high level of durability.

Larger duct openings can be sealed in combination with our specially designed tri-flexible foam. This is available as a complete set FiloSeal +

• Flexible, one component, adhesive and sealing compound in a cartridge – (310ml)
• High levels of Gas and Water tightness
• Removable / Re-enterable
• Excellent adhesion, applicable to all common building materials
• Shows Fire resistance properties
• Resistant against Water, Alkaline, Chemical agents
• Resistant to Hydrogen Sulphide / Methane and many other Gases (NedLab)
• Non corrosive
• Solvent free
• Shock absorbing
• Non toxic, neutral and almost odourless
• Suitable for any shaped duct / bore hole / opening
• Quick and easy installation
• Seals all know materials, PVC & PE sheathed cables, PILC, (HD) PE pipes
• Suitable for renovations, can be installed retrospectively

FiloSeal+HD FIRE provides a strong support system using the fire resistant hexagonal blocks made of our specially formulated material called ‘Formite’ which builds up like a honeycomb structure. FiloSeal+HD FIRE is suitable for sealing  empty or any cable configuration or pipes contained in one duct and also allows easy re-entry of the seal to add or remove cables or pipes as required

The Filoform duct sealing system FiloSeal+HD FIRE uses our fire resistant MD+ sealant which is easily applied from a skeleton gun. The high quality, one component, flexible sealant “MD+” is based on a silicon compound that cures with air (Humidity).

After application and full curing the thixotropic MD+ forms a plastic elastomer mass with special qualities effectively sealing and bonding, while providing a high level of durability.

FiloSeal+HD FIRE is very easy to apply regardless of the type of cable scenario in the cable ducts as it uses strong, but flexible hexagonal blocks to support the cable and provide a strong backing for the seal

The unique design of the hexagonal blcoks makes positioning and separation of the cables very simple while also providing a strong backing for the MD+ to be applied on.

• Fire resistant (BS EN1366-3 2009)
• Flexible, one component fire resistant adhesive and sealing compound in a cartridge – (310ml)
• High levels of Gas and Water tightness
• Excellent adhesion, applicable to all common building materials
• Resistant against Water, Alkaline, Chemical agents
• Resistant to termites (Mastotermes Darwiniensis) Northern Australian termites
• Resistant to Rats
• Resistant to Hydrogen Sulphide / Methane and many other Gases (NedLab)
• Non corrosive
• Solvent free
• Shock absorbing
• Non toxic, neutral and almost odourless
• Also suitable for limiting the EX-zones during transitions (observe chemical resistance)
• Suitable for any shaped duct / bore hole / opening
• Quick and easy installation
• A complete kit
• Seals all know materials, PVC & PE sheathed cables, PILC, (HD) PE pipes
• Suitable for renovations, can be installed retrospectively
• Over 25 years of operational experience

The Filoform Cabinet Base Sealant is designed for use in LV distribution cabinets, public lighting cabinets, cabinets for traffic control, and outdoor transformer station installations.

The casting resin prevents ingress of pests and weed growth or the penetration of the roots of plants. In addition, a solid floor improves the climate within the stations. This ensures less chance of interference and extends the life of the components.

• Packaged in set with 2 x 2.5 L.
• Resin contains no MDI.
• Prevents ingress of moisture, pests and the instrusion of weeds, roots and plants.
• Improves the climate inside the street cabinets and transformer stations.
• Decrease of the sensitivity to interference of the equipment.
• Extension of the life of the components.
• Quick and easy to apply.
• Good flow properties.
• Self levelling characteristics.
• Good adhesion.
• Smooth and non-tacky surface.
• Easy to remove for local input of additional cables and pipes; after wards easy to finish.

The Filoform Foam Plate is a closed cell, cross-linked polyethylene foam. The product can be easilty shaped with a knife to fit into a floor or duct opening. The foam will prevent humidity to acces stations. The foam can be fixed to walls and cables with use of the Filoform Hyperflash tape.

• Creates a airtight seal to prevent humidity problems
• Easy to cut
• Flame retardant

• Prevents ingress of moisture and condensation to reach equipment.
• Improves the climate inside the street cabinets and transformer stations.
• Decrease of the sensitivity to interference of the equipment.
• Extension of the life of the components.
• Quick and easy to apply.
• Easy to remove for local input of additional cables and pipes.

• Exellent for applications in building and construction
• Formable sealing tape for air and watertight seals from difficult angles
• Stretch tape for a perfect seal around pipes and ducts

• Material is extremely stretchy in all directions and deformable up to 580%
• Tape can be applied without the formation of seams and folds
• A permanent suture is secured by substantially high bond strength
• Adhesive provides an exceptional bond to wood, plastics, metal, glass and stone