APengineering HomeProductsRunpotecRUNPO Z – CABLE PULLING GRIP WITH SWIVEL

RUNPO Z – CABLE PULLING GRIP WITH SWIVEL

The patented RUNPO Z – cable pulling sleeve with twist compensation has an integrated twist compensation, which compensates for the twisting of the cable in the tube and thus protects the insertion system, the pulling sleeve and the cable enormously. The quick-release fastener, an ergonomically shaped hook, allows the unit to be attached and pulled in within seconds and there is no longer any need for time-consuming screwing and unscrewing. The total breaking load of 200 kg has been tested on the hook, the connecting pressures, the twist compensation and the stainless steel pulling sleeve braid. The hook, the connections and the pulling sleeve braid are made of high quality stainless steel, thus no rusting and long life of the RUNPO Z (cable pulling sleeve).

Instead of two conventional pulling sleeves, only the RUNPO Z (20274) is required.

Optimal area of application: The flexible stainless steel double braid supports cables of 9 – 15 mm diameter.
Scope of delivery: 1 piece RUNPO Z cable pulling sleeve with twist compensation and quick release fastener

 

Categories: ,

Description

ADVANTAGES

    • Swirl compensation and quick lock
    • 200 kg total breaking load
    • Attachment and pulling within seconds
    • Long service life
    • Instead of 2 cable pulling sleeves, the RUNPO Z

Technical Data

Dimensions: L 300 x B 200 x H 10 mm
Diameter: 4 – 6 mm
Weight: 0,03 kg
Total tension load: 200 kg
Weave length: 280 mm
Material: Stainless steel weave
EAN-Code: 9120045473292

Source of Supply

1 piece RUNPO Z cable pulling sleeve with twist compensation and quick release fastener

 

Quick Comparison

SettingsRUNPO Z - CABLE PULLING GRIP WITH SWIVEL removePULLING ROPE POLYESTER Ø 10 mm incl. reel removeRUNPOFIX WITH HOOK - CABLE PULLING LOOP WITH PROTECTIVE CAP removeCABLE GUIDE ROLLER - SHAFT INSIDE EDGE removeRUNPOFIX WITH RTG - SET - CABLE PULLING LOOP WITH PROTECTIVE CAP removePULLING ROPE POLYESTER ON DRUM Rope Ø 8 mm remove
ImageRUNPO Z – CABLE PULLING GRIP WITH SWIVELRUNPO Z – CABLE PULLING GRIP WITH SWIVELRUNPO Z – CABLE PULLING GRIP WITH SWIVELRUNPO Z – CABLE PULLING GRIP WITH SWIVELRUNPO Z – CABLE PULLING GRIP WITH SWIVELRUNPO Z – CABLE PULLING GRIP WITH SWIVEL
SKU
Rating
Price
Stock
Availability
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionThe patented RUNPO Z - cable pulling sleeve with twist compensation has an integrated twist compensation, which compensates for the twisting of the cable in the tube and thus protects the insertion system, the pulling sleeve and the cable enormously. The quick-release fastener, an ergonomically shaped hook, allows the unit to be attached and pulled in within seconds and there is no longer any need for time-consuming screwing and unscrewing. The total breaking load of 200 kg has been tested on the hook, the connecting pressures, the twist compensation and the stainless steel pulling sleeve braid. The hook, the connections and the pulling sleeve braid are made of high quality stainless steel, thus no rusting and long life of the RUNPO Z (cable pulling sleeve). Instead of two conventional pulling sleeves, only the RUNPO Z (20274) is required. Optimal area of application: The flexible stainless steel double braid supports cables of 9 - 15 mm diameter. Scope of delivery: 1 piece RUNPO Z cable pulling sleeve with twist compensation and quick release fastener  
RUNPOTEC polyester pulling ropes are optimally suited for horizontal cable pulling with the RUNPOTEC CW 800 E capstan winch. RUNPOTEC recommends using the connecting swivel with twist compensation for horizontal cable pulling. It reduces frictional resistance and protects the cable and the feed system. The reel allows controlled winding and unwinding of the rope. In addition, the rope is perfectly stowed away and ready for use at any time. The 770 mm reel cage size can be easily rolled and transported due to the integrated wheels. Safety instructions:  Not suitable for vertical cable pulling, must not be used to carry or lift loads or persons. Optimal application: for horizontal cable pulling in combination with the CW 800 E capstan winch Application video: a short, very informative application video can be viewed by scanning the QR code or on www.runpotec.com. Scope of delivery: pulling rope polyester Ø 10 mm incl. reel
 
RUNPOFIX - cable pulling loop with protective cap and hook. Flexible loop made of stainless steel with Ø 1.5 mm. Easy attachment of cables to the loop. The protective cap allows cables with plugs to be pulled through pipes or other situations while protecting the plug. The hook makes it possible to fasten RUNPOFIX cable pull-in loops to all products with RUNPOGLEITER. (RUNPO 5, RUNPO 1, etc.) Also ideal for fixing or pulling several cables together.Optimal area of application: From 14 mm inner diameter and non-routed cables. Scope of delivery: 1 piece RUNPOFIX with hook - cable pulling loops with protective cap
   
 
RUNPOTEC polyester pulling ropes are optimally suited for horizontal cable pulling with the RUNPOTEC CW 800 E capstan winch. RUNPOTEC recommends using the connecting swivel with twist compensation for horizontal cable pulling. It reduces frictional resistance and protects the cable and the feed system. Safety instructions:  Not suitable for vertical cable pulling, must not be used to carry or lift loads or persons. Optimal application: for horizontal cable pulling in combination with the CW 800 E capstan winch. Scope of delivery: pulling rope polyester Ø 12 mm on drum  
 
RUNPOFIX - cable pulling loop with protective cap and RUNPOTEC RTG Ø 6 mm thread. The built-in twist compensation allows the cable to rotate in the pipe. Easy attachment of cables to the loop. Connectors are protected by tensile stress on the cable. The protective cap allows cables with plugs to be pulled through pipes or in other situations while protecting the plug. Also ideally suited for fixing or pulling several cables together. Due to the RUNPOTEC RTG Ø 6 mm thread all RUNPOFIX cable pulling loops are compatible to all RUNPOTEC products with RTG Ø 6 mm thread. Optimal area of application: From 14 mm inner diameter and non-routed cables. Scope of delivery: 1 piece cable pulling loop with protective cap and RUNPOTEC RTG Ø 6 mm thread
   
RUNPOTEC recommends using the connecting swivel with twist compensation for horizontal cable pulling. It reduces frictional resistance and protects the cable and the feed system. Safety instructions:  Not suitable for vertical cable pulling, must not be used to carry or lift loads or persons. Not recommended in combination with the CW 800 E capstan winch Optimal area of application: for horizontal cable pulling Scope of delivery: pulling rope polyester Ø 8 mm on drum
 
Content

ADVANTAGES

    • Swirl compensation and quick lock
    • 200 kg total breaking load
    • Attachment and pulling within seconds
    • Long service life
    • Instead of 2 cable pulling sleeves, the RUNPO Z

Technical Data
Dimensions: L 300 x B 200 x H 10 mm
Diameter: 4 - 6 mm
Weight: 0,03 kg
Total tension load: 200 kg
Weave length: 280 mm
Material: Stainless steel weave
EAN-Code: 9120045473292
Source of Supply 1 piece RUNPO Z cable pulling sleeve with twist compensation and quick release fastener  
  • Spliced loops at the start and end of the rope
  • Low rope elongation
  • Practical reel for controlled winding and unwinding of the rope
  • Reel with extendable feet
  • Reel with parking brake

Technical Data
Dimensions: L 550 x B 220 x H 650 mm
Length: 120 Meter
Total breaking load: 1640 kg
Weight: 16 kg
Reel basket Ø: 514 mm
Internal basket width: 70 mm
Material: Polyester rope
Ø Rope: 10 mm
Loop: 2x spliced-in loops
EAN-Code: 9120045475906
Source of Supply pulling rope polyester Ø 10 mm incl. reel

ADVANTAGES

  • Quick attachment to the loop
  • Protects connectors from damage
  • Tensile load transfer to the cable, not to the connector
  • Flexible stainless steel loop
  • Pulling in of preassembled cable with plug possible
  • Thanks to quick-release hooks compatible to all RUNPOTEC products with RUNPOGLEITER

Technical Data
Dimensions: L 300 x B 210 x H 25 mm
Recommended tube-Ø: 32 mm
Weight: 0,01 kg
Material: Special plastic
Ø Rope: 1,5mm/ stainless steel
Loop: Can be adjusted flexibly
Protective cap inner Ø: 20 mm
Protective cap outer Ø: 23 mm
EAN-Code: 9120045475807
Protective cap outer Ø: 23 mm
EAN-Code: 9120045475807
Source of Supply 1 piece RUNPOFIX with hook - cable pulling loops with protective cap  
  • Aluminium heavy-duty rollers with stainless steel ball bearings
  • Robust metal frame
  • CDP coating
  • Ergonomic aluminium carrying handle
  • Load bearing capacity 1.500 kg

Technical Data
Dimensions: L 220,5 x B 155 x H 163 mm
Weight: 3,03 kg
Material: Roller: Aluminium / Frame: Steel
Load bearing capacity: 1500 kg
Max. cable diameter: Ø 100 mm
Roll diameter: Ø 130 mm
EAN-Code: 9120045476378
Source of Supply 1 x cable guide roller - shaft inside edge  

ADVANTAGES

  • Quick attachment to the loop
  • Protects plugs against damage
  • Tensile load transfer to cable, not to the plug
  • Flexible stainless steel loop
  • Pulling of preassembled cable with plug possible
  • Compatible with all RUNPOTEC products with RUNPOTEC Ø RTG 6 mm thread

Technical Data
Dimensions: L 300 x B 210 x H 35 mm
Recommended tube-Ø: 20 mm / 25 mm / 32 mm / 40 mm
Weight: 0,04 kg
Material: Special plastic
Ø Rope: 1,5mm/ stainless steel
Loop: Can be adjusted flexibly
Protective cap inner Ø: 12 mm/15 mm/20 mm/27 mm
Protective cap outer Ø: 14 mm/17 mm/23 mm/30 mm
EAN-Code: 9120045475777
Source of Supply
1 piece cable pulling loop with protective cap and RUNPOTEC RTG Ø 6 mm thread

 
  • Spliced loops at the start and end of the rope
  • Low rope elongation
  • Top price/performance

Technical Data
Dimensions: L 230 x B 230 x H 217 mm
Length: 120 Meter
Diameter: Reel basket Ø 230 mm
Total breaking load: 1100 kg
Weight: 6 kg
Material: Polyester rope
Ø Rope: 8 mm
Loop: 2x spliced-in loops
EAN-Code: 9120045475890
Source of Supply Pulling rope polyester Ø 8 mm on drum
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Advanced Process Engineering
Advanced Process Engineering (APE) is a critical technologies solution provider of instruments, subsystems, and process control that measure, control, monitor, analyse critical parameters of advanced manufacturing processes to improve process performance and productivity.
  • Contact Us
  • Delivery Information
APEngineering.sg ©2021- 2022 | Advanced Process Engineering Pte Ltd. All Rights Reserved.
Previous Next
Close
Test Caption
Test Description goes like this
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping
X