Flue Gas Analyzer System

Continuous monitoring of up to 5 components:
NOx, SO2, CO, CO2, and O2

Ideal for flue gas monitoring in waste incinerators, boilers, and furnaces

  • Space-saving design
  • A variety of functions: auto calibration, O2-corrected output, averaging, alarm, etc.
  • Japanese type approval
Category:

Description

Principle NOx, SO2, CO, CO2: Non dispersive infrared sensor
O2: zirconia sensor or paramagnetic sensor
Components 1 component: NOx, SO2, CO, CO2
2 components: NOx + SO2, NOx + CO
3 components: NOx + SO2 + CO
4 components: NOx + SO2 + CO + CO2
O2 measurement can be added to above all.
Range NOx: 0–50 ppm…5000 ppm
SO2: 0–50 ppm…5000 ppm
CO: 0–50 ppm…5000 ppm
CO2: 0–10%…20%
O2: 0–10%…25%
Repeatability ±0.5% FS
Zero drift ≤ ±1.0% FS per week
Ranges below 200 ppm: ≤ ±2.0% FS per week
In O2 measurement: ≤ ±2.0% FS per month
Span drift ≤ ±2.0% FS per week
In O2 measurement: ≤ ±2.0% FS per month
Linearity ±1.0% FS
Response time ≤ 120 s (for 90% response, from the analyzer inlet)
≤ 240 s for SO2 measurement
Output signal • 4–20 mA DC (linear)
(instantaneous values, O2-corrected instantaneous values, O2-corrected average values, O2 average)
• Contact output
(CO peak count and alarm, concentration alarm, under auto calibration, device error, etc.)
Contact input Auto-calibration start, average reset, range switch, output hold, pump ON/OFF, etc.
Functions Auto calibration, O2 correction, averaging, CO peak count and alarm, data recording
Operating environment -5°C to +40°C or -10°C to +40°C, RH 90% or lower
Power supply voltage 100, 110, 115, 200, 230 V AC, 50/60 Hz
Dimensions 800 (H) × 1710 (W) × 615 (D) mm, for indoor use
Houses six 3.4 L standard gas cylinders
Gas conditions Temperature Standard: ≤ 800°C
Non-standard: ≤ 1000°C or 1300°C
Dust ≤ 100 mg/Nm3
Pressure -3 to +3 kPa
Component SO2: ≤ 500 ppm
NOx: ≤ 1000 ppm
CO2: ≤ 15%
CO: ≤ 2000 ppm
HCl: ≤ 1000 ppm
Advanced Process Engineering
Advanced Process Engineering (APE) is a critical technologies solution provider of instruments, subsystems, and process control that measure, control, monitor, analyse critical parameters of advanced manufacturing processes to improve process performance and productivity.
  • Contact Us
  • Delivery Information
APengineering.sg / APengineering.my ©2025- 2026 | Advanced Process Engineering Pte Ltd. All Rights Reserved.
Previous Next
Close
Test Caption
Test Description goes like this
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare
X